Automatic orientation at start of navigation
Not a Problem
Since the last update (version 4), the automatic orientation no longer works when starting navigation.
Only by double-clicking the centering button, North Orientation - Actual Orientation, does the actual direction display again.
The same problem 
Hi,
please check if you have a preset linked to navigation (Locus settings > Navigation > Link to preset). If yes, then remove the link or change the linked preset configuration so that it has map rotation turned ON.
Hi,
please check if you have a preset linked to navigation (Locus settings > Navigation > Link to preset). If yes, then remove the link or change the linked preset configuration so that it has map rotation turned ON.
Thanks - rotation is always on. Alignment used to be automatic, now it's on GPS.
Thanks - rotation is always on. Alignment used to be automatic, now it's on GPS.
So please select the "automatic change" so that hardware compass is used when standing still and GPS is used when in movement.
So please select the "automatic change" so that hardware compass is used when standing still and GPS is used when in movement.
Please create a backup of your settings and share it for a test. Thanks.
Please create a backup of your settings and share it for a test. Thanks.
Thanks. I can see that in the "gravel" preset, which is linked to navigation, you have auto-change set for the map rotation with the threshold speed of 2 km/h. This is too low - the app considers this speed as a standstill due to possible GPS deviations. Change it to 3.5 km/h, and the hardware compass will engage.
Also, in your general settings, you have "orientation via GPS" set for the map rotation—this setup doesn't rotate the map when standing still because the GPS only calculates the direction according to movement. Unless you use Locus Map in the car, use the auto-change with a threshold speed of 3.5 km/h. Use "orientation by GPS" to avoid the phone's compass's interference with the car electronics in a car only.
Thanks. I can see that in the "gravel" preset, which is linked to navigation, you have auto-change set for the map rotation with the threshold speed of 2 km/h. This is too low - the app considers this speed as a standstill due to possible GPS deviations. Change it to 3.5 km/h, and the hardware compass will engage.
Also, in your general settings, you have "orientation via GPS" set for the map rotation—this setup doesn't rotate the map when standing still because the GPS only calculates the direction according to movement. Unless you use Locus Map in the car, use the auto-change with a threshold speed of 3.5 km/h. Use "orientation by GPS" to avoid the phone's compass's interference with the car electronics in a car only.
Thanks! All settings applied.
Thanks! All settings applied.
Problem solved :)
Problem solved :)
Replies have been locked on this page!